Recent content by mullah

Hi All Does anybody know if a 1978 8011 Zetor Crystal would be OK to work a slurry tank agitator. Also what is the process to bleed the breaks after replacing a slave cylinder.

hi guys anybody know if my first post sounds like it is seals or would anybody hazard a guess at what it is going to cost me to fix this i.e hundreds or a thousand or more.

on my 8011 recently the hydraulic arms have started going down about half a foot and then lifting back up by themselves. the other day they would not lift at all i just put the lever back and tried again and they lifted the second time no problem i have been told that it is probably seals that...

thanks John ill check for these air holes. what was getting me was the fact that like you say oil would eventually pour out of the casing when you are filling it, so i could not see how i could overfill it as the refil point was half ways down the casing. anyway ill see if there is a blockage...

I have a small disc mower (4disc) that i bought second hand and i was told to put gear oil in it at the start of each year which i duly did, it does say Do not overfill where you put in the gear oil but i had no way of telling what level it was at so i filled it until i thought it was safe to...

Hi all, just wondering where the indicator switch would of originally been on a 8011 the indicators do not work on my crystal and i a thinking of getting them sorted and was just thinking that i dont know where the switch should be.anyhelp or suggestions for fixing and rewiring the lights would...

How much oil (Gallons) is required to fill the back end of an 8011

Hi Fellas, i have an 8011 and recently i noticed that when i take my foot of the clutch it makes a slight knocking noise - clutch it and it goes away is there damage being caused by this or is this normal or nothing to be worrying about. The tractor was hard to get into gear when i got it first...

Hi Fellas, i have an 8011 and recently i noticed that when i take my foot of the clutch it makes a slight knocking noise - clutch it and it goes away is there damage being caused by this or is this normal or nothing to be worrying about. The tractor was hard to get into gear when i got it first...

thanks dave i do indeed have all those controls

Hi Dave a power box is a hydraulic transport box. I dont know if my crystal has these levers you talk about, where in the cab are they situated or do i have to buy a seperate unit.

I am thinking about buying a power box and on the zetor crystal I have the hydraulic pipes but I dont know how to control the box do I have to buy a seperate control unit to operate the power box or how do the hydraulic pipes work on the zetor.

i was hoping i could replace them as a permanent fix to the problem rather than replacing or brazing (whatever that is) the existing type of injector pipes. I dont have a lot of spare time to be fixing leaks so i was looking for a more permanent solution to all the Oil and Diesel leaks.in the...

is it possible to change most of the diesel pipes for rubber pipes to stop the diesel leaks.

More oil and Diesel leaks have appeared really getting tired of this tractor now.