Search results for query: *

Did you check the fuel filter? I had a similar issue once on my 6341. New filter took care of it.

Don't know any thing about the 9641, I have a 2003 6341 I bought new from a local dealer, that soon after went out of business. Wanted to caution you about lack of dealers. Zetor has really cut back on on the North American market. My closest dealer is about 200 mile round trip here in southwest...

are the wheel bolts tight. had the same sound on my 6341. the bolts from the pan to the rim were loose.

Thanks DIY, but I am having trouble finding the diameter or the circumference.

Does anyone know the outside diameter of a new Barum 12.4X24 tire? Mine are dying of old age and am trying to fine a replacement that will match the 16.9X34 rears. Thanks for any help.

I bought a new 6341/with loader in April 2003. It has been a great tractor. Have used it hard. The problem we have here in Ohio is the lack of dealers. I hope Zetor NA will get that situation corrected. I have been on this site ever since I bought the tractor, but never can remember my log in...

Well, I got this fixed. I should have taken it apart before I ordered the "seal". It was shipped direct from ZetorNA. The seal turned out to be a 50 Cent O ring that weighed less than an ounce. The company charged $20.00 US for mailing from Jacksonville, Fl to Ohio. Total charge was $24.00. I...

Thanks for the reply Mike. I have replaced the cup seal in the cylinder, but it leaks around the shaft, and that makes it stay in 4X4. I will try a dealer to see if they can help. My past experience is that they don't know much about these tractors. I may have to replace the entire assembly. Is...

Thought I would try this again. Does anyone know if the seal at the bottom of the cylinder, that the shaft goes through, can be replaced? Thank you. George

Thanks Big Orn. Air pressure holds it out of 4X4. When you hit the switch or if you lose air it goes into 4X4. I have already replaced the seal on the shaft, but it is losing air where the shaft goes out the bottom of the cylinder body. I haven't had time to see is what kind of seal is at the...

Well, I replaced the seal in the cylinder, and it still leaks. What am I missing? The air comes out of the bottom of the cylinder, around the shaft. Thanks for any help I can get.

I thought it would have, but other than that it shouldn't be to difficult. Thank you George

I am getting ready to replace the seal in the cylinder, is there anything that I need to be careful about. Any advice will be helpful and appreciated. Thank you. GEORGE

Hi Mike It is the cylinder leaking around the shaft, and a little at the top cap on the cylinder. When I have 4X4 engaged the leak stops. I was concerned about corrosion on the walls of the cylinder. Do you know if it has a cup seal or O-ring? I haven't taken it off yet, wanted to find out what...

Most likely the rim width.

I have a 6341 with a leaking air cylinder that controls the 4X4. can this cylinder be rebuilt or will I have to replace the entire part? Dealers are few and far between here in Ohio, USA. Any advice will be welcome. Thank you.

Check clutch pedal free play first. make sure it is correct.

Was the fluid tank completely empty? If it was then both brake and clutch cylinders might be leaking. Have you found any brake fluid leaking? When I bought my new 2003 6341 I had problems with clutch and brake cylinders leaking, the company replaced them with same brand as JD. For the air leak...

I have a 6341, they do not have air brakes. The air operates the 4X4 and the diff lock. It seems to me you might have a leak in the clutch slave cylinder. Had the same problem on mine in the past. George

In 2003 I bought a new 6341 Super. Overall it has been a good tractor. Early on I had problems with the clutch and brake cylinders, but the company took care of the problems. This tractor does not have any "bells and whistles", just a basic tractor with enough HP and weight to do what I need...