Search results for query: *

thanks again for the response. I have been away again and upon returning home for a few days i saw that I needed to mow a bit with my Zetor and brush hog. So , with no time to work on the hand clutch lever, I proceeded to start the 6211 and mow one of my fields. But now the next problem,,,, I...

Hi Fellas, Thanks for the responses. I have been away the last month or so. Finally had time to try the hand clutch next to the hand brake. Actually it is seized. so I cant engage it. I guess its been out in the weather too long. I will try messing with it when I get a chance. Thanks

I've tried engaging it several times this way, with always the same result. (Of Course) Mostly been starting with it already engaged if I am using my mower. I really have no more questions at this time. Hopefully I can figure the rest out on my own. This is a great forum, so glad you have it...

Thanks for the response. Wow, I did not know there was a hand clutch. I will give it a try. This has been very helpful. Thanks again.

Thanks again for all your help. I replaced the master cyl and all is good with the clutch now. The biggest problem remaining with this tractor is with the Hydraulics engagement. This tractor will not allow me to engage the hydraulic lever while running. (Just grinds) So I have to start it with...

Thanks for the last post, I finally had a chance to look at this thing again after 10 days away. looks to me, the cylinder behind the pedal is seized in. Therefore all slack in the pedal as I reported.I am a bit confused because you stated this was the slave cyl Correct?? Because this cylinder...

Awesome, This is exactly the information I was looking for. I am away from home now, on a business trip. When I return, I will look to see if this linkage is there and whether the slave cylinder is working. I will write again in a few days with the results. Thanks again for all your help.

under the clutch pedal between it and the floor is a slave cylinder that the pedal pushes in by a shaft on the pedal, fluid then is forced down to the piston on the side that works the clutch arm. diyfarmer/ 2 forterra.. HSX 140 OK, This is the part I really don't understand. You say there is...

Thanks again for responding. I looked at the clutch pedal and cylinder below once again. What I still dont understand, is how depressing the pedal, causes the cylinder to actuate. There appears to be no linkage between them. None that I can see anyway. The pedal only has a lever, that closes a...

Thanks again for writing. The pedal just goes to the floor. Like its not connected to anything. Is there a linkage arm that may have disconnected? I need to buy an illustrated parts manual, not sure if everything is there. Thanks Again

Thanks for the very quick response. I have looked at the brake fluid bottle under the hood. It is still full, and I haven't added any. Also I see no evidence of a leak in the area. However any leaking would likely pool on the ground below. I will look into this further, but are there any other...

Hi, Just bought a used older Zetor 6211 and it seemed to run fine for an hour or so. then the clutch pedal just went slack. Tractor starts and runs fine but no clutch, so cant put it in gear anymore. Just bought a maint manual, trying to learn about this tractor. In the mean time, does anyone...