Search results for query: *

The compressor is engaged by lifting a 90 degree bent wire up, the pushing a knurled lever towards the front of the engine. If the air outlet line is blindcapped and the compressor engaged, it will wear out the shaft key because force will exceed design specs by far. In a normal air brake...

What most likely happened, is that your friend left the air compressor chugging against a blindcapped line. It slams the keyway in the compressor shaft out, behind which the fuel injection pump is connected. You will most likely be alright with new pushrods and a new compressor shaft, if you...

It seems like a reasonable investment for a Ukrainian business, to invest in military production in a country that has the largest army of Europe and spends over 4% of GDP on defence: https://notesfrompoland.com/2024/07/16/poland-has-natos-third-largest-military-new-figures-show/

It was a version sold by Motokov Norge.

Apparently, the new owner wants to abandon tractor production and fully concentrate on the defence production ? Anyways. One less competitor in the Polish market for Zetor, where they have to win their most important battle next year...

Also, no solid future strategy = no investor.... If they do as they always did, they will get the same result as always, which is balancing on the edge of profitability whilst the market share slowly erodes.. Investors need to see a plan...

To be honest, comparing my mates CVX 1145 with Carraro independent suspension, with the Puma 180 with very simple trunnion suspension, for me the independent suspension isnt worth the added expense and added wear and tear on all those links. These axles are impossible to keep tight. And for...

Zetor lost its market because they kept thinking too small. They are yet again dropping the 6 cylinder model in favour of a four cylinder, instead of uprating the 6 cylinder model with a market conform model... same as they did 15 years ago. So i'd thought we'd better encourage them a bit...

Sounds good. Then Rada 8 with 260-300-340hp ZF TMT27-32 CVT and FPT NEF67 engine. Its the only engine in the market that can maintain 50hp per liter in heavy use. Above that, Zetor will not have any business for the next decade.. If they ever go above 350hp i would consider badge engineering a...

It runs out of gear ? There is a row of 5 bolts in front of the lever, these are hollow with a spring and ball inside. These cause the clicking you hear when you select a gear. Either the most left one became undone, or the spring broke, so that it doesnt press the ball tight into the notch on...

At our 5245 the ground cable behind the battery box, connected to the chassis, rotted in half. You dont see that unless you crawl underneath..

Be welcome here ! 👍

Zetor 6714 was a rice paddy special, sold in Japan by Iseki. Different brakes and shaft seals for the mud.

Ive heard people putting an orbitrol in one, to feed the original steering housing... never seen it in real life though..

Www.hydrauliktop.sk

Finally some good news for Zetor: Danatek, Zetor dealer since 2023, has now become importer for Denmark and Norway. HC Pedersen, also a Danish company, represented Zetor for decades, yet because Zetor could not offer a full portfolio in key market segments, has taken on Deutz about a decade...

After two failed auctions, the price was reduced by 40% when a Kiyv businessman bought all Ursus assets. Intention is to continue production with all employees remaining...

If you pull it off, you cant check function. You can test with compressed air, the pressure isnt high enough to blow past the seals (despite air being thinner than oil) when there is still oil on them. If you support it with some wooden blocks on the workbench so the mechanism doesnt rest on...

What i am not sure of, is if the ground speed PTO works while not driving. On the UR1 its connected after the main 5 speed output, you can use it with the hi lo range in neutral, but you dont get high and low range PTO speeds. On the UR2 you can choose high low and reverse range, so apparently...

I just wonder, which manufacturer builds a pump that needs to turn counterclockwise ? Indeed a slurry agitator gearbox would be best. It has two input shafts and one output, so you can push and pull with it, depending on which stub you put the PTO shaft to.