Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account. No worry, its all for free!
For more details - click here.
The wiring in these tractors is quite simple and there are not many wires under the cabin floor. Cabin fuse boxes get their power from two red wires which come from the starter. Maybe you had one of these wires shortcutting and then the heat melted the starter solenoid wire which turned the...
I have a 1996 Zetor 8540 and it's engine has four glow plugs. It starts easily even at under -10 celsius. This tractor also has old type front axle and I have not bad thing to say about it. :)
I think that rubber and M8 is clutch axle brake lever. It is supposed to work when you press clutch pedal as far as it goes. This is to make it easier and faster to engage gear. I believe that it should be adjusted so that when clutch pedal is down it presses that rubber.
Thanks for the info!
Zetor has in its spare book two sizes of 24 inch rims for this model, 10 and 12 inch wide. I asked prices and then decided to buy another set of 12.4-24 tires because they are cheaper and I had no time. One of the tires had large crack in side and almost no tread left...
I am considering of putting wider front tyres to my 8540. What I now have are 12.4-24 on 10 inch wide rim. For wider tyres I need 12 inch wide rims.
Does rims from other Zetor models fit to my tractor?
Update to this problem
I dropped the pan and opened connecting rod bearing which was in very good condition, then I tried if there was play in piston pin, I found nothing.
After that I changed injector from 3rd cylinder to 4th but that made no difference in that noise. Then I noticed that...
Good online/pdf spare parts catalogue for URIII can be found for example [url=http://www.ztr-agrokft.hu/download/Zetor%20UR%20III%207520-10540.pdf]here[/].
Oil pressure light goes off about 1-2 sec after coldstart and at warm engine almost immediately after start up. I have not noticed the light to come on at hot or warm engine even at low idle. The time I have got this tractor it has never overheated. Of course I don't know what previous owner has...
Hello
I am wondering what could be wrong in my 8540 because it is making some kind of knocking noise when engine is cold. I tried to loosen each injector pipe nut one after another and when last cylinder's injector is out of the game noise disappears. So I took this injector to the mechanic who...
Yes. New spare part shaft has threads but not the one that has been installed to my Zetor.
UPDATE
I got the shaft out. I had to weld a piece of bolt to the end of the shaft and then pulled it out. :D
Bearings were gone and I have now split the tractor.
Problem is now how I get the shaft out?
It seems to be sitting very tightly in its place. I have removed the circlip, right side cover and of course front plate. I have also been told that it should come off just by pulling, but this one is...
OK, Thank You for answering I'll check that.
You mean bearing found [url=http://www.ztr-agrokft.hu/download/Zetor UR III 7520-10540.pdf]here[/] on page 87, item number 65?
Thanks again
If I remember correctly noise gets quieter or goes away, especially when tractor has just been started and oils are cold.
At low idle you can't almost hear the noise but if RPMs are increased to about 1000 its quite loud.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.