Search results for query: *

You nailed it Renze. Yesterday I pulled the cover and was looking to see if I could see anything obviously wrong. I checked the measurements of the forks and found the traveling clutch forks were way out of spec according to the repair manual. Long story short, I adjusted the three forks to...

Thanks Renze. I was afraid of that. I was hoping it was an adjustment issue because of the clutch only responding when the pedel is depressed at the very top and the fact that it slips a bit then it engages. Do you have any advice on adjustment so I may get by a little longer?

The clutch on my 7245 is not working properly and I have no idea what the problem could be. The clutch only engages and disengages at the very top of the clutch pedal. When I first start plowing snow the clutch does not slip but after awhile it will slip and get progressively worse with use...

Well, I changed out the hydraulic oil and filter today (+15 degrees F.). I was told by the service manager at Zetor to replace the 85/90W hydraulic oil with Universal Tractor Fluid and that it was his opinion that the milky color of the fluid is from condensation and that by running the tractor...

I do not have a cab for my tractor and it is always parked outside, sometimes under cover sometimes not. Do you really think the milky color is from condensation? That would make a lot of sense. I had once thought that rain water must be getting into the cases somewhere, but I really could not...

I changed the oil when I installed the new hydraulic pump in November 2011, so the oil has seen 2 warm weather seasons and 2 cold weather seasons. I only put 40-80 hours per year on this machine. I've owned this tractor for 10 years and have always wondered about the coffee with cream color of...

I am having a problem with the hydraulics not working at all on my 7245 when the outside tempatures get below freezing. It seems that the colder the temps the longer it takes for the hydraulics to start working. Sometimes I have to let the machine idle for an hour before the hydraulics start to...