Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

Thanks Big Orn. Air pressure holds it out of 4X4. When you hit the switch or if you lose air it goes into 4X4. I have already replaced the seal on the shaft, but it is losing air where the shaft goes out the bottom of the cylinder body. I haven't had time to see is what kind of seal is at the bottom of the cylinder, and if it can be replaced. Thanks for your reply.

[QUOTE="biely036341, post: 19392, member: 150"] Thanks Big Orn. Air pressure holds it out of 4X4. When you hit the switch or if you lose air it goes into 4X4. I have already replaced the seal on the shaft, but it is losing air where the shaft goes out the bottom of the cylinder body. I haven't had time to see is what kind of seal is at the bottom of the cylinder, and if it can be replaced. Thanks for your reply. [/QUOTE]

Verification