Hi, hydraulics on 6211 have been getting slower over the past year or so,have replaced filters etc,presume the pump is worn out . would this sound correct? front end loader,post driver use mainly running in 1000rpm 2500hrs.. regards Rob....
-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
6211 hydraulic pump
- Thread starter rh_6025
- Start date
Z
zetormatic
Guest
2500hrs running in 1000rpm??? it would certainly explain why it is buggered
its not really designed for this but it will work you might need to consider fitting a crankshaft driven pump??? (your local enginneer will advise you on this) it will happily pump all day at any engine speed and reduce pto wear ( because its not running ) and also boost hydraulic power and capacity
its not really designed for this but it will work you might need to consider fitting a crankshaft driven pump??? (your local enginneer will advise you on this) it will happily pump all day at any engine speed and reduce pto wear ( because its not running ) and also boost hydraulic power and capacity 
- Joined
- Jul 5, 2003
- Messages
- 4,021
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
We sold a good wrecker for little money (to clear the yard) this spring... you're too late for that one now...
Make sure you dont get the lines too narrow... flow restrictions eats away quite some engery.. I have a chart with flow characteristics so i can look it up for you...
Make sure you dont get the lines too narrow... flow restrictions eats away quite some engery.. I have a chart with flow characteristics so i can look it up for you...
