6245 loader question

My Allied 594 loader has a front hydrallic pump in addition to the internal pump. This helped the speed of my lift. The problem is that the pump seized and broke off the shaft. Can I go back to just using the internal pump? The other question would be where to look for a replacement pump and how much that would cost? Thanks for any help.

Hi Rob,

You could just use the tractors internal hydraulic pump but your lifting capacity will be reduced.

As a matter of interest, how was the front hydraulic pump on the loader driven? Electric??

As regards a replacement, Allied are part of Buhler so try this link to locate a delaer/distributor:
http://www.buhler.com/sitefiles/product/compact_imp/loader/mountingkit.php

TomZ
Tom

Most of these front mounted pumps are straight on the crankshaft, or with a belt pulley.

Some brands used a front mounted pump, and a motor on the 4wd shaft, to achieve a hydrostatic crawl gear, from 0.1 to 4 km/h

I have a Zetor(Allied) 594 loader that I want to connect to my main hydrallic system. What is the best way to accomplish this. It was connected to a front pump that no longer works. It has a control valve that is connected to a joy stick. Will I still be able to use that joy stick. Do I have to connect the loader to my remotes?

In reply to Rob, this question comes up regularly so it is in the forum archives.There should also be a diagram in the gallery that Tom drew up to help you.