Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
I did not know any better. Today i installed a seal kit on the whole cylinder. the main problem was the dust boot on top link on control head was missing and fluid was pouring out of the top. I replaced all boots and seal washers and it still leaked. took apart the second time and found the o ring on fixed shaft that goes into cyl messed up from over eager mechanic (me). reinstalled oring and worked perfect the second time. Learning a lot about 6245's. started tracing down electrical problems today.