Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

With the tractor engine off and the pto clutch lever pulled up and the plastic cover on the pto speed switch pulled off, I sprayed wd 40 into the hole in the middle of the pto speed selector and also sprayed all around it. I then rotated the pto speed selector to the right and as far left as I could. I also tried using a pipe wrench to get more pull on the pto speed switch to get it to turn more to the left. I was still unable to get the tractor into the 540 pto speed. Is there something else I should be doing?

Thank you for you help.

[QUOTE="trodgerson, post: 19118, member: 1735"] With the tractor engine off and the pto clutch lever pulled up and the plastic cover on the pto speed switch pulled off, I sprayed wd 40 into the hole in the middle of the pto speed selector and also sprayed all around it. I then rotated the pto speed selector to the right and as far left as I could. I also tried using a pipe wrench to get more pull on the pto speed switch to get it to turn more to the left. I was still unable to get the tractor into the 540 pto speed. Is there something else I should be doing? Thank you for you help. [/QUOTE]

Verification