7245 clutch issue

[jammy100]

My clutch pedal is nearly at the floor and crunching going into gear. it was fine until slave cylinder bolt came out and piston came out put it all back together and bled it now the clutch is doing this any ideas please.

 

[Renze]

The clutch and brake use the same fluid from the same reservoir.

Because the suction port of the clutch is higher than the suction port of the brakes, you'll loose the clutch before you loose brakes.
You're simply out of brake fluid.

 

[ixer0]

Hi,

Have you tried bleeding it again ?

Mike

 

[jammy100]

No it is full of fluid and have bled it several times. i am now wondering if slave cylinder is gone but seems ok and not leaking any fluid

 

[Renze]

probably a scratch on the slave piston.

Take off the dust boot of the master cylinder, if its full of oil , its the cause of your problem. If not, replace the slave.