8045 slasher operation

J

jex

Member

Level 2

Joined

May 17, 2012

Messages

22

Location

Queensland, Australia

First name

John

Machinery:

Zetor 6045

• Sep 25, 2013

• #1

I still have not figured out how to adjust the 3 point linkage controls on my 8045 to get my slasher to follow the contour of the ground I am slashing. Is there some way of overiding the automatic leveling function so the slasher will follow the land contour?

 

Renze

Administrator

Staff member

Joined

Jul 5, 2003

Messages

4,042

Location

Laag Zuthem

First name

Renze

Machinery:

1976 5718
1978 5718 35kmh: Work in progress
1967 3011

• Sep 27, 2013

• #2

drop the hitch, its single acting so it wont push the slasher down.

 

J

jex

Member

Level 2

Joined

May 17, 2012

Messages

22

Location

Queensland, Australia

First name

John

Machinery:

Zetor 6045

• Sep 29, 2013

• #3

I have dropped the hitch as far as it will go but the slasher still comes of the ground when going over a rise

 

Renze

Administrator

Staff member

Joined

Jul 5, 2003

Messages

4,042

Location

Laag Zuthem

First name

Renze

Machinery:

1976 5718
1978 5718 35kmh: Work in progress
1967 3011

• Sep 29, 2013

• #4

Then you should extend the pullrods between the short upper arms and the lower link arms. Or rise the 3pt attachment points on the slasher...

 

J

jex

Member

Level 2

Joined

May 17, 2012

Messages

22

Location

Queensland, Australia

First name

John

Machinery:

Zetor 6045

• Sep 30, 2013

• #5

Ok, thanks mate, I'll have a play with the adjustments. I thought I may have had an incorrect setting on the controls.

 

Renze

Administrator

Staff member

Joined

Jul 5, 2003

Messages

4,042

Location

Laag Zuthem

First name

Renze

Machinery:

1976 5718
1978 5718 35kmh: Work in progress
1967 3011

• Sep 30, 2013

• #6

On the UR1 the hitch would start lifting again if you pushed the lever too far down. its too long ago i used the hitch on a UR2 to remember if it also has this.. saturday i wheelied over the main road when crossing it with a 15t load of bales delivering to a customer...