Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

----Hi I got the old unit in an 8011 converted to hydro static by getting the following done, remove the unit from the tractor, remove the cone assembly where the steering rod goes in ,fit a plate the same as the plate on the front of the unit. Fit a suitable danfoss unit.Oil supply and return come from the power steering tank to the danfoss unit and outlet and inlet pipes go to the plates front and back on the steering unit where the steel pipe goes in. I got the parts stripped off the steering by my local ursus dealer and he also fitted new seals at the same time.Very light steering after that.

[QUOTE="lwalsh2, post: 12687, member: 1054"] ----Hi I got the old unit in an 8011 converted to hydro static by getting the following done, remove the unit from the tractor, remove the cone assembly where the steering rod goes in ,fit a plate the same as the plate on the front of the unit. Fit a suitable danfoss unit.Oil supply and return come from the power steering tank to the danfoss unit and outlet and inlet pipes go to the plates front and back on the steering unit where the steel pipe goes in. I got the parts stripped off the steering by my local ursus dealer and he also fitted new seals at the same time.Very light steering after that. [/QUOTE]

Verification