Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

Thanks for the quick replies!

I found the two 19mm adjusting nuts and wound them out so the locking but was flush with the end of the thread, then bang, the brakes came off! I'd say there's a touch of rust in there somewhere from lack of use, as it had been sitting for about 2 or more years in a shed

Will look into new brake linings for it, was quite daunting coming up to a roundabout pumping on the brakes and nothing happening, good thing it has a handbrake!

[QUOTE="farmerdave, post: 16950, member: 578"] Thanks for the quick replies! I found the two 19mm adjusting nuts and wound them out so the locking but was flush with the end of the thread, then bang, the brakes came off! I'd say there's a touch of rust in there somewhere from lack of use, as it had been sitting for about 2 or more years in a shed Will look into new brake linings for it, was quite daunting coming up to a roundabout pumping on the brakes and nothing happening, good thing it has a handbrake! [/QUOTE]

Verification