Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
is there a tool, special clamp for holding the pressure plates togetheir when i change the pto clutch,
tried doing it with g clamps , but finding it hard to keep clutch centered, it,s about 2mm of center
I never had any problem aligning them. Sometimes just put a long bolt in, then push the clutch pedal to release the spring pressure, then put a pipe wrench on the PTO to turn the input shaft splines in line. just some wiggling.