This question is related to my reverser troubles. How much play up and down, side to side is acceptable (normal) on the input shaft? I don't see any evident problems with bearing(s) or wear other than the bronze washer(s) discussed in the other thread. Play seems excessive though.
-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
clutch shaft play
- Thread starter dyates
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,020
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
play on the clutch end (by tilting the shaft), where it normally sits in the pilot bearing inside the flywheel ? or axial play by racking it back and forth, or radial play by pulling it up and down ? Up and down and back and forth is not how its supposed to be.
Being able to tilt the front end of the shaft a centimeter isnt that bad, its aligned in the pilot bearing inside the flywheel, and the outer hollow shaft sits on this wheel drive shaft with a needle bearing.
Being able to tilt the front end of the shaft a centimeter isnt that bad, its aligned in the pilot bearing inside the flywheel, and the outer hollow shaft sits on this wheel drive shaft with a needle bearing.
Similar threads
