-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
Gearbox sevice tools
- Thread starter finla89
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,047
- Location
- Laag Zuthem
- First name
- Renze
- Machinery:
- 1976 5718
1978 5718 35kmh: Work in progress
1967 3011
I made my own to pull the gear range layshaft out of my 3011.
Piece of C channel with a 17mm hole and two legs, M16 rod, a piece of 1" tube with a ring of 1 1/4 welded around it, then ground the end into four quarters. Put a wheel nut with the chamfered end against it so when i tighten it with two M16 nuts the wheel nut will expand the edge welded on the pipe, into the recess. Then use a 3rd nut to pull the shaft out.
Used once 15 years ago. Served me well, its with the batch of breaker parts on the shelf. Maybe i use it once more, maybe my family throws it away after i die.
Piece of C channel with a 17mm hole and two legs, M16 rod, a piece of 1" tube with a ring of 1 1/4 welded around it, then ground the end into four quarters. Put a wheel nut with the chamfered end against it so when i tighten it with two M16 nuts the wheel nut will expand the edge welded on the pipe, into the recess. Then use a 3rd nut to pull the shaft out.
Used once 15 years ago. Served me well, its with the batch of breaker parts on the shelf. Maybe i use it once more, maybe my family throws it away after i die.
Similar threads
