help

hello out there

i need some help
when i use my loader and can not use rear arms
i have the loader feed in one spool valve and the over
spool for tipper trailor
the level in cab next to rear arm one has to be forward for loader to work the rear arms used to work with it in that postion
but now i have to move it to the middle bit of pain when using front and back at same time

can you help fix this?

from antony

Hi Antony

What model Zetor do you have ?? It would be nice to know which country you are in.

Regards

Mike

hello

my zetor is 7745 turbo E reg
and i'am in cornwall uk

Hi Antony,
Welcome to the forum from S.Devon.
All I can suggest is that you check the flow control lever on the front of the seat box above the thrpttle pedal. Thie diverts oil from the internal to the external systems. sometimes the lever under the floor will come detached from the rod. It can be refitted with difficulty by reaching under the cab.
Mike is the resident expert on these things !!
Dave

Hi Antony

The easy option is if you happen to have a front mounted hydraulic pump driven off the engine front pulley. If so, you can re-pipe through the loader valve first.
With the pump in the rear end the only way both services will work is to modify the pump plate (not a job for the amateur mechanic). I'm not sure why it used to work, as the oil always takes the easiest route which is round the loader circuit.

Regards
Mike