• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

question John Deere 2700 (Zetor) series fault ?

corundal

Member
Level 1
Joined
Feb 23, 2013
Messages
79
First name
corundal
A friend who has a John Deere 2700 series Zetor (an Zetor 8540 I think) has stripped a major drive gear in the transmission. Is this a known fault or a one off failure?

1739354440287.png
 
Never heard of that. Only the 4th gear of a Zetor 3011 and Zetor 4712 sometimes broke a teeth, when the shift fork fell inbetween the gears due to 30 years of rough operators.
 
those tractors were basically a Zetor 7245 (depending o the model) which had no transmission issues that i have heard of
 
those tractors were basically a 7245 zetor (depending o the model) which had no transmission issues that i have heard of
2700 and 2800 were the 8540 and 9540.


 
It was a 2700. It had 6000 hours on it and was using a mulcher. It stripped the main input shaft in the gearbox. The replacement part from John Deere cost $600. I suspect it would have been cheaper from Zetor .
 
I never ordered shafts but i bet its a lot cheaper at Zetor .
 

Users who are viewing this thread

Back
Top Bottom