-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
Loader brackets
- Thread starter macintosh
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,019
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
The UR2 and UR3 4 cylinder models shared the exact same wheelbase, so it leads to believe it shouldnt be hard. If i recollect correctly the distance between the engine side framerails is 580mm on a UR2 and 535 on a UR1 ?? But i dont know the UR3 really...
Measure that..
Measure that..
- Joined
- Jul 5, 2003
- Messages
- 4,019
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
i would not be surprised if it is. The Czechs started the UR3 development in 1988 or so, after loosing the UR2 in 1981 to the Slovakian ZTS factory by socialist government rule. The iron curtain fell in 1989, and Zetor introduced it in 1991 to replace the UR2 they lost to Slovakia, the country which declared independency a year after. They still dont get along very well, Slovakia was, and is more socialist minded, unemployment is higher, none of their big manufacturers of the socialist era is still developing its own products. Czechs were classical liberal minded (not like "liberals" in the USA, they hijack the principle) many of their national industries adapted and still exist (Zetor Tatra Skoda) and their economy runs better. (Slovaks can react a bit butthurt when you say it and tell you that Zetors parent company HTC group is Slovak, but HTC is founded after the Velvet Revolution, so it is not really a "survivor" but a success story in the newly established free market 
)
Anyways, to cut short this history, the UR3 was designed to replace the UR2 in the then popular and profitable 75-105hp bracket because the ZTS produced tractors were unstatisfactory to dealers in the West. I wouldnt be surprised if they designed them with commonality of attachments in mind.
)Anyways, to cut short this history, the UR3 was designed to replace the UR2 in the then popular and profitable 75-105hp bracket because the ZTS produced tractors were unstatisfactory to dealers in the West. I wouldnt be surprised if they designed them with commonality of attachments in mind.
