-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
Loader for Z. 5718
- Thread starter fordson
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,022
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
You have to make shure that the loader does not get into the way of the steering arms and rod at the left side of the bonnet.
Any loader will fit with minor modifications.
Standard factory loaders have a half frame, from the two groups of bolts (4 M12 ?? in square) on the front axle frame, and a brace around the cab support beam.
Any loader will fit with minor modifications.
Standard factory loaders have a half frame, from the two groups of bolts (4 M12 ?? in square) on the front axle frame, and a brace around the cab support beam.
- Joined
- Jul 28, 2003
- Messages
- 147
- First name
- Steve
The most easily available loader is probably a small Quickie loader either an old Red one or the newer Black 2300 model with a single crowd ram-I have seen quite a few of these on 4wd Zetors.The Quickie models are well made and easy to get parts for especially second hand buckets etc.Also you need to get a set of Quickie brackets to suit any UR1 5711-7745 model.They will be proper ones that mount onto the rear axle housing bolts to stop the tractor breaking in half like early Massey loaders used to do!!!!
I have a UK made Tanco 968 loader that is also pretty good but they are fairly rare-I am looking for a bigger978 for extra lift with Big bale silage and fertilizer as I have the brackets already..
I have a UK made Tanco 968 loader that is also pretty good but they are fairly rare-I am looking for a bigger978 for extra lift with Big bale silage and fertilizer as I have the brackets already..
Similar threads
