Need Model Number

T

TonyB

Guest

• Jul 19, 2005

• #1

I have a Long model 1100 that was manufactured by Zetor back in the mid 70's. It's 92 HP and weighs about 8000 lbs. I need to know what the Zetor model number is so I can order parts. My local dealer has not been able to help. Your assistance would be greatly appreciated as I need a rear axle. Thanks

 

T

treaney

Member

Level 1

Joined

Jul 10, 2003

Messages

570

First name

TomZ

• Jul 20, 2005

• #2

The Long 1100 would be one of the Zetor Crystal's - 8011 or 12011 based model.

Is it a 4 or 6 cylinder engine?

Does it have a turbo?

A trip to a tractor breaker's yard might yield the part you need.

Tom

 

B

bre97815

New member

Level 1

Joined

Jul 19, 2005

Messages

5

First name

TonyB

• Jul 20, 2005

• #3

It is a 4 cyl with a turbo. The right rear axle broke right at the hub. I was hoping to find a used one but needed the Zetor model number. Any additional information would be appreciated. Thanks for the reply.

 

T

treaney

Member

Level 1

Joined

Jul 10, 2003

Messages

570

First name

TomZ

• Jul 20, 2005

• #4

Ouch! How did you manage to break the axle??? Use or abuse or just plain material failure?

I looked in my workshop manual but this doesn't give any part numbers. Could you try welding the half shaft to the hub?

Failing that Igor may be able to help - see his pitch for Zetor parts on this site.

Tom

 

B

bre97815

New member

Level 1

Joined

Jul 19, 2005

Messages

5

First name

TonyB

• Jul 21, 2005

• #5

I was just pulling a hush hog when it broke. I think it must have been cracked for a while and just chose that time to break the rest of the way. I think I have found an axle but still need brakes and some seals. Do you know if those are still available from a Zetor dealer? Thanks for your help.

 

T

treaney

Member

Level 1

Joined

Jul 10, 2003

Messages

570

First name

TomZ

• Jul 22, 2005

• #6

Good news on the axle. Disk brakes woukld be readily available from a Zetor dealer.

Tom

 

Renze

Administrator

Staff member

Joined

Jul 5, 2003

Messages

4,059

Location

Laag Zuthem

First name

Renze

Machinery:

1976 5718
1978 5718 35kmh: Work in progress
1967 3011

• Jul 24, 2005

• #7

it must be a 10011 or 10045. The rear axles are all the same for the Crystal series.

 

B

bre97815

New member

Level 1

Joined

Jul 19, 2005

Messages

5

First name

TonyB

• Jul 25, 2005

• #8

Thanks for the info. I may have more questions later.