• Hello.
    In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
    No worry, its all for free!
    For more details - click here.

FAQ PTO - Zetor 5911, 6911, 6011, 7011, 5245 to 7341 Turbo

dave_peters

Member
Level 2
Joined
Dec 8, 2006
Messages
628
First name
Dave P
Hand clutch for PTO is the lever facing backwards on the handbrake mounting. Disengage when lifted.
Gearstick is the small lever (B, picture 23) on the left on the floor in the centre.
PTO/Hyd stick is the small lever on the left site (A, picture 23)
Starting at the bottom. ie. lever pushed right forewards,lever moves in approx 25mm stages which are detented.

1723441905725.png1723441758838.png
Picture 23: Lever A​
  1. PTO off, hydraulic pump (engine speed dependent) switched on.
  2. PTO on and hydraulic pump (engine speed dependent) switched on.
  3. Neutral (PTO and Hydraulic off)
  4. Ground speed dependant PTO (Attention - in reverse gear rotate backwards!)

PTO speed, not in pos 4 above ,altered by the central lever (1, picture 24) under the seat on the floor .
  • To the left : 540 upm PTO
  • Neutral, centre out of gear including hydraulkic pump
  • To the right : 1000 upm PTO

When it's in ground speed mode, if you put the low/high lever (B, picture 23) in neutral, then you can have 5 speeds and reverse using the main gearstick, useful for unblocking muckspreaders etc, but be warned, you can get around 1500 rpm + in 5th !!
1723441382277.png

See also:
 
Last edited by a moderator:

Users who are viewing this thread

Back
Top