Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

The reason its not idleing is probobaly because your pump has no oil in it? its probobaly doing what they call surgeing.

the round nose bonnet comes of a 3011 or a 3045.

this will not fit your 3511

your steering could be worn out internally. there is a big square block inside the box with two large cutout either side. i have been told if you remove this and turn it upside down it will work again? but im not so sure. i took my 3545 one apart to clean out the sludge and didnt find any shims! possibly your bearings of the steering wheel shaft have collapsed causing it to not react properly.

up and down in the revs? its defenately surgeing. fill it with oil quick. if you want to know how just ask me.

wait i remember now there are shims in the steering box. take of the fuel tank. and remove the steering wheel. the undo the 4 boltsfor the sleeve which goes over the main steering shaft 17 or 18 mm. then grip the shaft with mole grips and turn it one way ( cant remeber which) and the bearing should pop out under that are the shims.

anything else just ask. matthew

<blockquote data-quote="zetor3545" data-source="post: 6417" data-attributes="member: 1856">The reason its not idleing is probobaly because your pump has no oil in it? its probobaly doing what they call surgeing.the round nose bonnet comes of a 3011 or a 3045.this will not fit your 3511your steering could be worn out internally. there is a big square block inside the box with two large cutout either side. i have been told if you remove this and turn it upside down it will work again? but im not so sure. i took my 3545 one apart to clean out the sludge and didnt find any shims! possibly your bearings of the steering wheel shaft have collapsed causing it to not react properly.up and down in the revs?&nbsp; its defenately surgeing. fill it with oil quick. if you want to know how just ask me.wait i remember now there are shims in the steering box. take of the fuel tank. and remove the steering wheel. the undo the 4 boltsfor the sleeve which goes over the main steering shaft 17 or 18 mm. then grip the shaft with mole grips and turn it one way ( cant remeber which) and the bearing should pop out under that are the shims.anything else just ask. matthew</blockquote>

[QUOTE="zetor3545, post: 6417, member: 1856"] The reason its not idleing is probobaly because your pump has no oil in it? its probobaly doing what they call surgeing. the round nose bonnet comes of a 3011 or a 3045. this will not fit your 3511 your steering could be worn out internally. there is a big square block inside the box with two large cutout either side. i have been told if you remove this and turn it upside down it will work again? but im not so sure. i took my 3545 one apart to clean out the sludge and didnt find any shims! possibly your bearings of the steering wheel shaft have collapsed causing it to not react properly. up and down in the revs? its defenately surgeing. fill it with oil quick. if you want to know how just ask me. wait i remember now there are shims in the steering box. take of the fuel tank. and remove the steering wheel. the undo the 4 boltsfor the sleeve which goes over the main steering shaft 17 or 18 mm. then grip the shaft with mole grips and turn it one way ( cant remeber which) and the bearing should pop out under that are the shims. anything else just ask. matthew [/QUOTE]

Verification