- Joined
- Jun 18, 2015
- Messages
- 1
- First name
- TexasZetor
I've got a '98 Zetor 3320. The other day when I was shifting gears, it was VERY slow to engage. I'd release the clutch, and a few seconds it would slowly engage the gear & work normally. Did it a few times, I didn't use the tractor long that day.
Started it again a day or two later, and at first it wouldn't engage the gear at all. After a little playing with the clutch & shifter, now the clutch is VERY stiff and still no ability to engage gears.
In looking around the web, I've seen references to the clutch master or slave cylinders, or the clutch fork. Anyone here have more insight or other questions? And how difficult are these various parts to replace, any links to instruction videos?
Thanks
Started it again a day or two later, and at first it wouldn't engage the gear at all. After a little playing with the clutch & shifter, now the clutch is VERY stiff and still no ability to engage gears.
In looking around the web, I've seen references to the clutch master or slave cylinders, or the clutch fork. Anyone here have more insight or other questions? And how difficult are these various parts to replace, any links to instruction videos?
Thanks
