Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
Scan turbo in denmark used to make kit for these tractors.
Orginal parts is available so there is no problem to fit a turbo on your tractor using orginal parts., I did it on my 8145 one year ago.
This year i think i will do it on my 12145.
Just change the orginal exhaust and air intake manifoilds, by those who are for turbo. You have to drill a hole at the bottom of the block for retur-oil.
I also changed the radiator,beqause the air pipe go on the left side on turbo-models.
I also replaced the orginal 1,2mm head gasket by 1,5mm, but i am not sure that was necessary.
There are gel type turbo gaskets. 1.2 and 1.5mm have to do with piston height, if you want to do a very precise job of getting the compression ratio and valve to piston clearance to spec.
I allways use 1.2mm gaskets.