Hi. I rebuilt my water pump on my 6945 about 6 months ago. New bearings, and new 2 piece ceramic seal. I have only ran it maybe 2 minutes since then due to me doing other work on the tractor but tonight I noticed that there is coolant coming out of the weep hole. Does that mean I didn't do a good job or does the ceramic seal have to wear in before it can seal properly? Im hoping that it just has to wear in... Does anyone have advice before I tear it apart again?
-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
water pump leaking afer rebuild
- Thread starter arthur
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,064
- Location
- Laag Zuthem
- First name
- Renze
- Machinery:
- 1976 5718
1978 5718 35kmh: Work in progress
1967 3011
I had this once on a waterpump after installing a new bearing. It wasnt the ceramic slider, but the rubber boot around the seal spring. I ended up getting a brand new water pump for 25 euro.
Similar threads
