• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Zetor 12011 1000 rpm Pto Will not turn help

D

deadly__dunder

New member
Level 1
Joined
Nov 12, 2017
Messages
3
First name
PMG
Hi! i got an zetor crystal 12011 with a problem with the 1000 rpm does not work. the 540 rpm works just fine but when i engage the 1000 rpm with the lever under by the the seat nothing happens. it seems to shift the gears and i can kinda hear it it when the tractor is not running but i am not sure. anyone had this problem?
 
You dont shift 1000rpm with the lever under the seat, it gets you from independent to groundspeed. You shift 1000 by taking off the 7 splined stub and sticking it into the side of the gearbox where the 21 splined stub is stored.
 
Thanks! the 1000 pto was not there it was suppose to be so i need to order a new one. but how do i get the 540 pto out? do i have to get the bolts around the pto out and take of the cover? does not the hydraulic oil want to drain out?
 
Thanks! the 1000 pto was not there it was suppose to be so i need to order a new one. but how do i get the 540 pto out? do i have to get the bolts around the pto out and take of the cover? does not the hydraulic oil want to drain out?
Click to expand...

Unless you need a 21 spline stub shaft for a machine running on 1000, leave the 540 shaft in place and you can still run the tractor at 1000 only get the 1000 shaft at a breakers yard. I have an old one we used with the end welded
 
ok. i dont need the 21 splined we only use the 7 splined. so just so I understand the way this works, it's a kind of stick that is pushed in to make it go at 1000 rpm when I need it. and then if I want it to go on 540 i just take the 1000 shaft out of the hole under the cab.
 
on the right side of the bell housing there a hole where a 1000 shaft pushes in and a cap bolts on to put the tractor into 1000 revs, open off the cap and take out the shaft and she's back in 540.

 
You must log in or register to reply here.

Similar threads
question How? pto to turn counter clock wise at ZTS 16245
Replies
11
Views
1K
diyfarmer
question Zetor 12245 PTO Questions (gregkon)
Replies
1
Views
394
diyfarmer
question Zetor/ZTS 8111 PTO clutch problem
Replies
15
Views
2K
diyfarmer
question Zetor UR2 oil filter (Zetor/ZTS 8111)
Replies
6
Views
698
diyfarmer
question Zetor 8011 - clutch trouble
Replies
20
Views
1K
diyfarmer

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more...