Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

Big Orn,

I thought of this at night in bed, a few hours after i wrote here (yes, i'm brainsick taking the whole world's zetor problems with me to bed, i know... )
but there's a shaft with two arms, that goes throught your bellhousing, the slave clutch cylinder is on the outside of the trans, pushing on an arm, which is connected via this shaft to another arm operating the clutch bearing.

...Maybe your clutch arm is bent, so that it sticks sometimes ?? or maybe a good greasing will help ??

[QUOTE="Renze, post: 2229, member: 19"] Big Orn, I thought of this at night in bed, a few hours after i wrote here (yes, i'm brainsick taking the whole world's zetor problems with me to bed, i know...:p ) but there's a shaft with two arms, that goes throught your bellhousing, the slave clutch cylinder is on the outside of the trans, pushing on an arm, which is connected via this shaft to another arm operating the clutch bearing. ...Maybe your clutch arm is bent, so that it sticks sometimes ?? or maybe a good greasing will help ?? [/QUOTE]

Verification