Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
Some front axels are different and dont have the dust boots but on mine there is two large rubber boots at the bottom of each stub axel and Im unsure on how to change them.
Some front axels are different and dont have the dust boots but on mine there is two large rubber boots at the bottom of each stub axel and Im unsure on how to change them.
I seen a picture of one in an old Zetor catalogue, is the boot under where the stub axle comes thought the axle, if so it looks like you will need to open the castle nut on the top of the steering arm, take off the arm then jack up the tractor and press down the whole stub back through the axle down on to the ground.
i think your studs must have never been opened before we had 5718 and 7211 and i can't remember any rubber boots but neither tractors were bought new somebody could have whipped them off
Me too here, we have a 6718 never remember seeing them, it's only I have a Zetor catalogue for our 6718 and there is a picture of the lock on a 5718 and there is the boot.