• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Zetor 5718 PISTON LINER

richard_a

Member
Level 1
Joined
Sep 27, 2008
Messages
35
First name
Richard A
5718 one piston liner leakin water should i replace all liners and pistons. engine always blew oil out breather pipe:sneaky:
 
Hi

The only sure cure will be to replace them all. If you want to try the economy route, is there a wear mark at the top of the liners ? If not too bad just replace the piston rings and give the bores a good rough up. The water leak should be cured with new 'O' rings on each liner.

Mike
 
Managed to remove piston liner, pin hole in liner thinkin of just replacing the one piston and liner what do you think will it be ok ,.any clues about torque nut settings
 

Users who are viewing this thread

Back
Top Bottom