Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

Thanks again for responding.
I looked at the clutch pedal and cylinder below once again.
What I still dont understand, is how depressing the pedal, causes the cylinder to actuate. There appears to be no linkage between them. None that I can see anyway.
The pedal only has a lever, that closes a switch when the pedal is fully depressed. The switch has no wires connected to it, they appear to have been cut by the previous owner at some time in the past.
So for me, it appears to be a missing or broken linkage between the pedal and cylinder, but again, i really dont understand how this is supposed to work.
I wish I could send a picture, this would help you understand what I am talking about.
I looked up the cylinder on line and I can buy a new one for $50
Also, if I had an illustrated parts diagram, I could figure out if some linkage was missing / broken.
Thanks again

<blockquote data-quote="jmeyer2100" data-source="post: 20393" data-attributes="member: 2007">Thanks again for responding.I looked at the clutch pedal and cylinder below once again.What I still dont understand, is how depressing the pedal, causes the cylinder to actuate. There appears to be no linkage between them. None that I can see anyway.The pedal only has a lever, that closes a switch when the pedal is fully depressed. The switch has no wires connected to it, they appear to have been cut by the previous owner at some time in the past.So for me, it appears to be a missing or broken linkage between the pedal and cylinder, but again, i really dont understand how this is supposed to work.I wish I could send a picture, this would help you understand what I am talking about.I looked up the cylinder on line and I can buy a new one for $50Also, if I had an illustrated parts diagram, I could figure out if some linkage was missing / broken.Thanks again</blockquote>

[QUOTE="jmeyer2100, post: 20393, member: 2007"] Thanks again for responding. I looked at the clutch pedal and cylinder below once again. What I still dont understand, is how depressing the pedal, causes the cylinder to actuate. There appears to be no linkage between them. None that I can see anyway. The pedal only has a lever, that closes a switch when the pedal is fully depressed. The switch has no wires connected to it, they appear to have been cut by the previous owner at some time in the past. So for me, it appears to be a missing or broken linkage between the pedal and cylinder, but again, i really dont understand how this is supposed to work. I wish I could send a picture, this would help you understand what I am talking about. I looked up the cylinder on line and I can buy a new one for $50 Also, if I had an illustrated parts diagram, I could figure out if some linkage was missing / broken. Thanks again [/QUOTE]

Verification