Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
you must have a wiring problem so, or the indicator stalk is not engaging, check there is power at the stalk. take out the fuse for the indicators and change it anyway
when you remove the fuses from the holder sometimes the reverse side of the fuse unit comes loose so put your hand around the back and make sure there all in out side that might be a broken or poor earth
when you remove the fuses from the holder sometimes the reverse side of the fuse unit comes loose so put your hand around the back and make sure there all in out side that might be a broken or poor earth
And that's the reasons I said check and double check the fuses before trying anything else. Sometimes spade fuses look ok but are still broken when changed or corroded.
My horn stopped working and it was just corrosion on the fuse when not been used everyday
I replaced the fuse today and to my surprise the indicators are now working !!
The old fuse when checked wasn't blown but when I put it back in, indicators wouldn't work.
So hopefully this problem is finally resolved now.