Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

Reply to thread

Message

You need to stick with the 6945 rear end, or dismantle both and change the pinion shaft, and the 4wd idler gear running on the hi/lo range layshaft. Pinion shaft, hi/lo layshaft are different and it doesnt have the idler gear fitted.

The 3045 didnt have an idler gear but acted on the range gear, thats why it only had 4wd in high range.

[QUOTE="Renze, post: 20361, member: 19"] You need to stick with the 6945 rear end, or dismantle both and change the pinion shaft, and the 4wd idler gear running on the hi/lo range layshaft. Pinion shaft, hi/lo layshaft are different and it doesnt have the idler gear fitted. The 3045 didnt have an idler gear but acted on the range gear, thats why it only had 4wd in high range. [/QUOTE]

Verification