My 6911 has started putting the water into the engine oil ! I have read somewhere that it could be the liner seals ? If so is this a big job to repair ? I was contemplating adding a sealant to the coolant to see if this might cure it - Any thioughts ?
-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
Zetor 6911 - Water In Engine Oil - Help !
- Thread starter jason
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,020
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
that, or the head gaskets.
If you put 1 bar on the cooling system with an air compressor (the pressure at which normally the filler cap blows by) you might see seeping water if the oil sump is removed. Needless to say, do not run the engine, just pressurise it and see.
You might hve to remove the oil pump and baffle too, but no big deal.
If you put 1 bar on the cooling system with an air compressor (the pressure at which normally the filler cap blows by) you might see seeping water if the oil sump is removed. Needless to say, do not run the engine, just pressurise it and see.
You might hve to remove the oil pump and baffle too, but no big deal.
Similar threads
