-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
question Zetor forterra 140 hsx - failure code 5200258
- Thread starter Gremblinas
- Start date
- Joined
- Nov 30, 2011
- Messages
- 1,749
- Location
- Republic of Ireland
- First name
- diy farmer
- Machinery:
- Zetors HSX 140, 2x 8111. CNH 895, MF50B. Heap of machinery.
I had that light come on, on my HSX too. What are your symptoms?
there is no symptoms its just the failture turn on
- Joined
- Nov 30, 2011
- Messages
- 1,749
- Location
- Republic of Ireland
- First name
- diy farmer
- Machinery:
- Zetors HSX 140, 2x 8111. CNH 895, MF50B. Heap of machinery.
You must have something wrong on your tractor for that red light to come on. It will be a sensor not have power shuttle
Last edited:
maybe gearbox sensor can be broken, because when i turn on tractor for example five times, the failture turn off
- Joined
- Nov 30, 2011
- Messages
- 1,749
- Location
- Republic of Ireland
- First name
- diy farmer
- Machinery:
- Zetors HSX 140, 2x 8111. CNH 895, MF50B. Heap of machinery.
It's torque sensor is faulty. I have a list of fault codes, downloaded and that's what that number is.
Last edited:
- Joined
- Sep 9, 2012
- Messages
- 1,191
- Location
- Wiedemar, Germany
- First name
- Joachim
- Machinery:
- Zetor 2011, Zetor 5011, Zetor 7340 Economic, and also a Trabant and Wartburg
Maybe it's just a damp plug or corroded contacts. When it comes to sensors, a defect doesn't always mean "defective" in the sense of the sensor being broken. What it actually means is that the sensor isn't providing plausible readings. It could be broken, but it doesn't have to be.
- Joined
- Nov 30, 2011
- Messages
- 1,749
- Location
- Republic of Ireland
- First name
- diy farmer
- Machinery:
- Zetors HSX 140, 2x 8111. CNH 895, MF50B. Heap of machinery.
It can't be damp in this one, it's inside the torque housing. It was changed on my HSX too.
- Joined
- Sep 9, 2012
- Messages
- 1,191
- Location
- Wiedemar, Germany
- First name
- Joachim
- Machinery:
- Zetor 2011, Zetor 5011, Zetor 7340 Economic, and also a Trabant and Wartburg
- Joined
- Nov 30, 2011
- Messages
- 1,749
- Location
- Republic of Ireland
- First name
- diy farmer
- Machinery:
- Zetors HSX 140, 2x 8111. CNH 895, MF50B. Heap of machinery.
Not sure I can do that, they're on a PDF on a USB stick, and has to be translated from some foreign language.
- Joined
- Sep 9, 2012
- Messages
- 1,191
- Location
- Wiedemar, Germany
- First name
- Joachim
- Machinery:
- Zetor 2011, Zetor 5011, Zetor 7340 Economic, and also a Trabant and Wartburg
- Joined
- Sep 9, 2012
- Messages
- 1,191
- Location
- Wiedemar, Germany
- First name
- Joachim
- Machinery:
- Zetor 2011, Zetor 5011, Zetor 7340 Economic, and also a Trabant and Wartburg
@Gremblinas
I don't know how the sensor is connected to the control box, even though the sensor is installed inside. If there are cables or connectors leading outside, it could very well be water or corrosion on the connector contacts.
We frequently experienced this with our Fendt Favorit 310, 824, and Xylon 524 after washing or after heavy rain when the tractor had to be left outside. This would then result in an error message because, for example, the expected sensor voltage wasn't present.
I don't know how the sensor is connected to the control box, even though the sensor is installed inside. If there are cables or connectors leading outside, it could very well be water or corrosion on the connector contacts.
We frequently experienced this with our Fendt Favorit 310, 824, and Xylon 524 after washing or after heavy rain when the tractor had to be left outside. This would then result in an error message because, for example, the expected sensor voltage wasn't present.
Similar threads
