• Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.

question Zetor Proxima 7441 front axel leak

tommy_dunne

New member
Level 1
Joined
Dec 20, 2012
Messages
2
First name
bunterd
Hi all..
My zetor 7441 has developed a leak in front axel behind the hub and is runing down the inside of wheel.
Question is about changing that seal?? Like is there just a big nut under holding on the hub in the middle of the planetery gears or is there more to it?? Thanks folks
 
Hi all..
My zetor 7441 has developed a leak in front axel behind the hub and is runing down the inside of wheel.
Question is about changing that seal?? Like is there just a big nut under holding on the hub in the middle of the planetery gears or is there more to it?? Thanks folks

The satellite carrier is under the hub. open the nut first then the bearings, pull them off then slide off the carrier. the seal is on the inside so it's a bit of a job.
 
Should asked first, if your axle is a Zetor type or a Carraro type? because they are different.
 

Users who are viewing this thread

Back
Top Bottom