Search results for query: *

Tks for the detailed info, have the fel running of the rear hydraulics for now. Ordered a new nut $75 Cdn. Looking for a pulley of a 2 series as well.

Finally found the problem, the crankcase nut that holds on the drive pulley was stripped. The hydraulic pump was front mounted the crank nut was drilled out and a sprocket was welded to it and hooked up to the pump with sprockets and roller chains. Had the nut re tapped but wasn't able to get it...

Yes. The pump is in the front and the shaft is turned by the front crank pulley.

Any idea what might cause this? Pump seized? Too hard to turn pump in the frigid temperature? I am just wondering if the stripped spline shat is my problem or a symptom of another problem? Thanks for the help.

Tks, for all the replies, it was a couple of problems, the solenoid was bad the first problem the starter is on the way out but, the lever on the stater that engages with the solenoid was cracked off

Tks, do you have any idea how big a job it is to check the spline, i.e. what has to be removed to get at it

Zetor 6045 fel not working. Upon further inspection the pump shaft doesn't turn??? I assume it should whenever the engine is operating. If something is broken how the heck do I get at it? It is -22 C here today, not sure if that would make a difference. Would anything else cause the shaft to not...

Thanks, but I have replaced the solenoid and had it checked, solenoid working fine

Having problems starting 6045, replaced solenoid, replaced starter relay, when you turn the key, just a click. Tractor will start if you cross the solenoid. Tks If somebody has a shop manual I would like to purchase one