Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account. No worry, its all for free!
For more details - click here.
by-passed lift pump tractor started ok.
electric fuel pump on when key is in.(running constant)
Letting it warm up, will keep you posted when I come back from running it for awhile.
thanks,
Rob
NM
Matthew,
Thanks for your reply. I have by-passed lift pump, electric pump on when key is in, and tractor started right up.
Zetor 6245 is running I will keep you posted after I run it for awhile.
Thanks,
Rob
NM
thanks for your reply,
zetor tractor starting ok but seems to starve a little then ok. going to clean out tank and replace hozes inside tank. Replaced all woven hozes probably sucking air but not leaking.
thanks,
Rob
NM
Just saw your post. You received good advice.
Glad your tractor running fine. I bought a electric pump from autozone works fine. Replaced all hozes air leaks are no fun.
Question?
What size were the hozes inside the tank?
Thanks
Rob
zetorcan7245,
Thanks for your reply. I fixed the small leak I was having at mechanical pump. The tractor starts but it does not stay started.
I will check to see if there is constant flow of fuel.
I will change wire on electric pump to stay on constantly when key is in. Again thanks for your...
? I installed electric fuel pump. But I did not bypass mech pump.
It seems that when I try to start the fuel does not go any further than that, because it leaks. Could the mech. pump be stuck closed therefore no fuel going to filters and so on. If this is the case then I should bypass pump...
I did it.
I installed electric pump between gas tank and sediment bowl.
I grounded the pump and wired the out to push button starter
:)
rob
:( tractor runs for only 15min before it dies out. I'm guessing lift pump is stuck, 2 questions;
1-Is there anything I should know if I bypass lift...
I need help wiring the electric fuel pump.
I wired the hot wire to the red wire in the ignition switch. When I did this the pump does not work until I insert the key(which is good thing). The problem I run into is when I push the button to start the tractor something is tripped, which cuts...
Where do you add oil to injector pump after installing lift pump and do you top it off?
Is it the breather bolt nearest driver seat or farthest from driver seat on top of injection system.
Thanks for all your help.
o--I removed lift pump, noticed fuel and oil draining when i removed lift pump out is that common??
oo--Examined lift pump for wear, nicks, etc.
Re-intalled lift pump.
ooo--I was wondering if oil is from injection system(lubricating oil) and do I need to add lubricating oil before I attempt to...
replace fuel filters.
It took a long time to start, using primer pump and loosing breather bolts.
drove for a few minutes then died. had to use primer pump and loosen breather bolt on injector pump and finally started. was able to drive home.
Im thinking the lift pump is not working.
Yes I agree, even if we think the worst. Even though everything was working fine and all of a sudden its not working.
we must look at the most obvious first.
Thanks to all who chimed in, I appreciate all the replies. I will give all of you and update soon.
Thanks,
Rob
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.