Search results for query: *

tractor running..cold start hot start. thanks, Rob

Tractor doing fine. Cold start also. Thanks to all. Rob

Tractor do fine now. cold start great. thanks to all Rob

By-passed lift pump, tractor started fine. Will keep you posted after running tractor for a while. thanks, Rob NM

by-passed lift pump tractor started ok. electric fuel pump on when key is in.(running constant) Letting it warm up, will keep you posted when I come back from running it for awhile. thanks, Rob NM

Matthew, Thanks for your reply. I have by-passed lift pump, electric pump on when key is in, and tractor started right up. Zetor 6245 is running I will keep you posted after I run it for awhile. Thanks, Rob NM

thanks for your reply, zetor tractor starting ok but seems to starve a little then ok. going to clean out tank and replace hozes inside tank. Replaced all woven hozes probably sucking air but not leaking. thanks, Rob NM

Just saw your post. You received good advice. Glad your tractor running fine. I bought a electric pump from autozone works fine. Replaced all hozes air leaks are no fun. Question? What size were the hozes inside the tank? Thanks Rob

zetorcan7245, Thanks for your reply. I fixed the small leak I was having at mechanical pump. The tractor starts but it does not stay started. I will check to see if there is constant flow of fuel. I will change wire on electric pump to stay on constantly when key is in. Again thanks for your...

? I installed electric fuel pump. But I did not bypass mech pump. It seems that when I try to start the fuel does not go any further than that, because it leaks. Could the mech. pump be stuck closed therefore no fuel going to filters and so on. If this is the case then I should bypass pump...

I did it. I installed electric pump between gas tank and sediment bowl. I grounded the pump and wired the out to push button starter :) rob :( tractor runs for only 15min before it dies out. I'm guessing lift pump is stuck, 2 questions; 1-Is there anything I should know if I bypass lift...

do you have an idea what could be cutting the power?

I need help wiring the electric fuel pump. I wired the hot wire to the red wire in the ignition switch. When I did this the pump does not work until I insert the key(which is good thing). The problem I run into is when I push the button to start the tractor something is tripped, which cuts...

Where do you add oil to injector pump after installing lift pump and do you top it off? Is it the breather bolt nearest driver seat or farthest from driver seat on top of injection system. Thanks for all your help.

o--I removed lift pump, noticed fuel and oil draining when i removed lift pump out is that common?? oo--Examined lift pump for wear, nicks, etc. Re-intalled lift pump. ooo--I was wondering if oil is from injection system(lubricating oil) and do I need to add lubricating oil before I attempt to...

dgo3512, was it difficult to re-route gas line and by-passing lift pump. thanks, rob.

replace fuel filters. It took a long time to start, using primer pump and loosing breather bolts. drove for a few minutes then died. had to use primer pump and loosen breather bolt on injector pump and finally started. was able to drive home. Im thinking the lift pump is not working.

Yes I agree, even if we think the worst. Even though everything was working fine and all of a sudden its not working. we must look at the most obvious first. Thanks to all who chimed in, I appreciate all the replies. I will give all of you and update soon. Thanks, Rob

Mike, no, have ordered just waiting for them to come in. what do you think, that could be problem? thanks, rob

Renz, I started tractor, while tractor running I opened breather bolt and fuel streamed out. thanks, Rob..