Search results for query: *

Hi Renze and Steve, thanks for you replies. I sorted out the problem two days ago but have been a bit remiss in updating this topic. It was stuck in the reverse gear. I unscrewed the four bolts that hold the gear stick in place and gave the gear stick base a couple of light taps with a hammer...

Hi Renze, what's a C pin? When I let the clutch out the tractor sounds like something isn't in gear properly (resistance to the tractor moving). How do I fix this gear problem? Thanks David

Hi all, I finally finished all my repairs and maintenance on my Zetor 6045 (fixed the indicators and tail lights wiring, cleaned the oil filter and did a oil change for the engine and injector pump) and took it for a drive. All was going well and I stopped and went to put the tractor in reverse...

I want to do an oil change on my Zetor 6045 and have already cleaned the centrifugal oil filter and I am seeking to clean the oil pump suction strainer (after first draining the engine oil). In the operator's manual it says "after draining old oil remove engine housing bottom guard then...

Hi Steve, following your advice I quickly fixed the electric speedometer. I carefully pried off the steel rim holding on the glass face then undid the four screws and pulled off the plastic cover for the electric cables at the back of the speedometer to enable me to slide the speedometer out of...

Hi, I have just brought a second hand camshaft sensor (rev centre) for my electric speedometer on my 6045 (as previous owner had taken it off). So when bolting on the camshaft sensor what is the correct position of the three terminals for the electric cables? i.e. should they be at the bottom...

Thanks Bjarne for the advice. I think my sensor has been removed as yesterday when I was looking for where the speedometer cables should connect to the engine between the alternator and water pump all I could see were four small bolts which held a small rectangular metal plate in place on the...

Thanks Gunnar7211, I located the centrifugal oil filter after reading your reply. I opened it up and cleaned it as directed by the operator's manual - with diesel. It was certainly full of gunk! I then dried all the bits and pieces and reassembled. Now for cleaning the oil pump suction strainer...

Hi, I would appreciate any information to do with changing/cleaning the engine oil filters on a Zetor 6045. I would also like assistance with fixing the speedometer on this tractor. I have a operator's manual for this tractor and it directs me to clean the centrifugal oil filter and oil pump...