• Hello.
    In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
    No worry, its all for free!
    For more details - click here.

Search results for query: *

  • Users: dozer
  • Order by date
  1. How to start a 8011 crystal

    Hi there, your crystal should start quite easily on one 12volt battery even when very cold. As said previously they did come originally with 2 12volt batteries linked in tandem not as 24v but as 12v.But really no need for 2 as one good powerful battery is more than up to the job.I personally had...
  2. leaky exhaust manifold

    Hi there,it's unlikely that exhaust manifold gasket gone will cause loss of power or oil up the exhaust on non turbo engine such as yours, regarding oil coming from exhaust on your 6211 can be caused by a number of things. These engines like to be worked so if you're only doing light work or...
  3. zts 12245 rear lens

    Hi there, i don't know whereabouts you are in ireland but you could try John Conaghy in Meath. Usually very reliable and has never let me down regarding parts for zetor and most other makes. Also very keen regarding price on all parts. He's situated between Kells and Oldcastle along the main...
  4. Zetor 6711 maintenance

    Hi there, in response to your question on the 6711 hand primer,it should be on left hand side of tractor as you sit in the seat.Mounted on the injector pump coupled usually beside small glass bowl. If original you will need to unscrew it a couple of turns anticlockwise before been able to pull...
  5. bleeding brakes 6711 SOLVED

    Hi, from memory bleeding the brakes on 6711 is done where pipe goes into half axle housing. There should be a bleed screw peeping up alongside pipe union. Might be handier for you to remove rear wheel if track set narrow, however can be done without removing the wheel although it can be a bit...
  6. 6718 water pump

    Hi there Mick, yes it is possible to get bearing and seal kits for your 6718 water pump.Regarding cap on water pump shaft housing it's for lubricating the bearings. You're quite right about there being grease in it.A bit old fashioned but a turn or two in every now and again keeps bearings...
  7. 4718 Engine Problems

    Hi, just a thought on why the injector might not seal.Have you replaced copper washer on the end of the injector and if so would it be possible the old washer is still down the injector hole in the head.
  8. 4712 not charging

    Word of warning. Hi there just a wee word of warning regarding loose dynamo and therefore loose fan belt, you need to be aware you have more to worry about than charging the battery. As a consequence of loose fan belt, engine cooling will be drastically reduced causing possible overheating and...
Back
Top