- Joined
- Nov 1, 2012
- Messages
- 9
- First name
- colestation
The cold start button on my 3011 is stuck in. I have WD40'd it, tapped and prodded it - no result. What next?
-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
3011 Cold Start Button
- Thread starter colestation
- Start date
- Joined
- Nov 4, 2012
- Messages
- 36
- First name
- gunnar7211
hi if i remember this corektly you shuold tvist it when you use it
grab hold of it with a plier and try tho gently tvist the button
remember to sett trotel to full sped first hope this helps
grab hold of it with a plier and try tho gently tvist the button
remember to sett trotel to full sped first hope this helps
- Joined
- Jul 5, 2003
- Messages
- 4,064
- Location
- Laag Zuthem
- First name
- Renze
- Machinery:
- 1976 5718
1978 5718 35kmh: Work in progress
1967 3011
mostly you can pull them out with a pipe wrench and some WD40
- Joined
- Nov 1, 2012
- Messages
- 9
- First name
- colestation
Many thanks for the suggestions. None of them worked ??? The problem was that the spring behind the button had disintegrated and jammed it solid. The answer was a new button carefully installed to maintain the original setting. The supplier was most helpful, suggesting that this problem often occurs if the Injection pump is left unlubricated. Keep it topped up
Similar threads
