I have 7245 1989. i changed the master cylinder and if pumped the clutch it would work for a while then pump again the same. i just changed the slave cylinder and bled it well and got same problem for a few minutes then the clutch went hard and when pressed then the piston came out of the new slave cylinder. is this likely to be a bigger problem with the clutch maybe or is there something else. thanks
-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
7245 Clutch problem
- Thread starter jammy100
- Start date
Hi,
When the piston comes right out it is usually because the thrust bearing has siezed and worn right through the release levers. Have a look through the side plate, but sounds like it has to be split.
Mike
When the piston comes right out it is usually because the thrust bearing has siezed and worn right through the release levers. Have a look through the side plate, but sounds like it has to be split.
Mike
- Joined
- Jul 5, 2003
- Messages
- 4,019
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
we used to do a 3011 or 4712 clutch in 4 hours. 7245 has a cab and power steering, which makes it a lot more awkward to get to the bolts, and the extra steering linkage tht has to be removed...
Hi
I usually do them in about 5 hours on my own if everything goes well. Takes a bit longer if you have to reseal the gearbox input. All the parts for the clutch assy are available separately.
Mike
I usually do them in about 5 hours on my own if everything goes well. Takes a bit longer if you have to reseal the gearbox input. All the parts for the clutch assy are available separately.
Mike
- Joined
- Jul 5, 2003
- Messages
- 4,019
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
Mike, we did it in 4 hours with an extra pair of hands to hand over a wrench, or hold the beer 
Renze
It depends how cold it is. I work faster if it's cold to get home quicker !!
Mike
It depends how cold it is. I work faster if it's cold to get home quicker !!
Mike
- Joined
- Jul 5, 2003
- Messages
- 4,019
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
Simon, would you please stop flooding the forum with your request for tractor sales ?? Or at least take them to where they belong, the classified ads section ? I the past 5 minutes i have moved several of your advertisements to the correct section. Its kinda rude to jump into any discussion with the question if anyone wants to sell a tractor.
Renze
Renze
Similar threads
