I would appreciate any help on replaceing my wheel cylinder on a 6245 zetor . Specifically on what will need to be removed to do the job. The manual that i have isn't real specific. I can see that there is a plate that can be removed, or will I have to take the whole housing off to do this. Thanks in advance for any help.
-
Hello.
In order to download file attachments or view image attachments in full size, you must be registered/logged in and have a level 2 member account.
No worry, its all for free!
For more details - click here.
brake cylinder replacement
- Thread starter renairbrn
- Start date
- Joined
- Jul 5, 2003
- Messages
- 4,021
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
you need an engine hoist, a forklift or a front loader to lift the portal from under the mudguard.
Replace the shaft seals as well, and check if the intermediate support bearing turns freely.
Replace the shaft seals as well, and check if the intermediate support bearing turns freely.
Thanks for the information. I am starting to get a better picture of how to do this, the only thing concerning me is it looks like the left rear cab mount will have to be unbolted and that seems exceessive for a wheel cylinder replacement. Thanks again for the replys. If anyone else can think of anything that you might think I could find useful please let me know.
- Joined
- Jul 5, 2003
- Messages
- 4,021
- Location
- Laag Zuthem
- First name
- Renze
Machinery:
1976 5718
1978 5718 35kmh: Work in progress
1967 3011
Stuff a piece of wood under the cab, take the central bolt out of the silentblock rubber, and let the portal swing all the way down. then you can slide the shaft out of the diff.
Remount in reverse order, slide it all the way in and then turn the portal, including the cab mount, back under the cab.
Remount in reverse order, slide it all the way in and then turn the portal, including the cab mount, back under the cab.
Similar threads
