clutch slipping on 6341

I HAVE a 6341 with 750 hours and the clutch is slipping when under a heavy load pulling a pasture renovator.

The owners manual said could be the clutch petal needs adjustment. There is no free play in the petal. Just a small push down will disengage the transmission and you can shift easily. Is this a worn out clutch or is there an adjustment to the clutch or the petal?

Any info will be helpful

Hi,

When a clutch drives right at the top of the pedal travel it's normally worn out. You could try releasing the bleed screw on the slave cylinder, just in case the master cylinder isn't letting the fluid back. It sounds like a splitting job.

Mike

i had this problem on a 7341 it vas not slipping but the slave cylinder almost popped apart, because the release bearings and fingers were worn away.