question Cold start button on a Zetor 6045

Just wondering, is there a cold start button on a Zetor 6045 and where do I find it?

Is the 6045 a UR1? If so, it should have a cold start button? If not, what can one do to get a 6045 to start easier than cranking to death or flattening battery?
What size battery should I be using?

Many thanks

Tom

Just wondering, is there a cold start button on a 6045 and where do I find it?
Is the 6045 a UR1? If so, it should have a cold start button? If not, what can one do to get a 6045 to start easier than cranking to death or flattening battery?
What size battery should I be using?

Click to expand...

As far as I know it doesn`t have a cold start button, if it had its on the injector pump but I think the 6911 was the last to have them.

If you have a new battery and hand prime the diesel still not starting any better, you could have a lazy starter. Also make sure your earth strap is clean. Your engine may not be building up compression.

Or you could try taking off the exhaust pipe off and see does this help to start.

Fully charged battery over 2 days and used hand primer about 30 times. A few cranks and it started.
See how things go.

Just wondering, is there a cold start button on a 6045 and where do I find it?
Many thanks
Tom

Click to expand...

There is post from June on here (Zetor 7045 fuel bleeding problems) and the man has put up a picture of his injector pump

On this picture you can clearly see a cold start button on the left top corner.

Thanks for the picture and that really helped. Great stuff.

If no smoke comes out while cranking, the fuel rack is stuck. Then take side cover off and soak with WD40