-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
More hydraulic outlets on a 4718?
- Thread starter agvg
- Start date
- Joined
- Jul 29, 2006
- Messages
- 453
- First name
- forterra11441
the easyest way to get a free return line. i have a 4712 by the way basically the same tractor but without factory mounted cab. i drilled a hole in the gearbox filler cap velded on a piese of threads an installed a 90 degrees bend and a short stump of hose with a quick coupler in the end. then the oil can flow freely into the gear box without going throug any valves.
Yes, but seems to be a bit complicated to expand the hydraulics the way the owner wants, I se some suggestions to reroute all the oilflow from the pump thru the extra valve and then back upp to the pipe that are going to the orginal valves.
As I understand it you must modify the mounting plate for the pump to get two extra in/outlets.
As I understand it you must modify the mounting plate for the pump to get two extra in/outlets.
- Joined
- Jul 5, 2003
- Messages
- 4,064
- Location
- Laag Zuthem
- First name
- Renze
- Machinery:
- 1976 5718
1978 5718 35kmh: Work in progress
1967 3011
The valve itself is the same on the 5211 and 4712. The difference is that a 4712 in many cases, has only one pipe mounted so you can only use it single acting.
The free return on a 5211 can be drilled into the gearbox at any time.
The free return on a 5211 can be drilled into the gearbox at any time.
Similar threads
