Hi this issue was resolved it was the rear towing bar making a sound as though a bearing was going. The bar was resonating at the rear and sounding through the gearbox to the rear PTO. After a lot of head scratching by the exsperts from the main Zetor dealer a pair of plyers pushed up against the rear bearing pin resulted in the noise ceasing. Real relief I thought the thrust bearing had gone. Dave
-
Hello Guest, you do not yet have the necessary rights to see the contents of our FAQ articles. Register in our forum, briefly introduce yourself and your Zetor in words and pictures and actively participate in discussions in the forum, then you will automatically receive access to the specialist articles in the FAQ.
Noisey PTO on newly aquired 7245
- Thread starter davek
- Start date
Hi this issue was resolved it was the rear towing bar making a sound as though a bearing was going. The bar was resonating at the rear and sounding through the gearbox to the rear PTO. After a lot of head scratching by the exsperts from the main Zetor dealer a pair of plyers pushed up against the rear bearing pin resulted in the noise ceasing. Real relief I thought the thrust bearing had gone. DaveOK, There's no explanation in the post of what sort of a noise you have, or what conditions make it occur.??? Perhaps we could help if we knew a little more.
I am working on a 7245 right now that will engage and spin the shaft with no load, but it zips by the splines under any load at all. I got it opened up, and working through my dealer, and with some help from Peter on the phone today, I think I have this one figured out.-)
I am working on a 7245 right now that will engage and spin the shaft with no load, but it zips by the splines under any load at all. I got it opened up, and working through my dealer, and with some help from Peter on the phone today, I think I have this one figured out.
-)Similar threads
